RD625

Repeaters & Systems | DMR

Highlights

diagram indicating highlights of RD625

Compact Design

The RD625 combines transmitter and receiver components, the voltage supply and the duplexer (optional) in its sleek chassis to provide a neat solution

Analogue or Digital

The RD625 repeater can automatically change between digital and analogue mode depending on the type of receiver signal, saving both time and money by eliminating the need to configure frequencies and channels manually

Flexible Networking

Connect the RD625 to an IP-based communication network to service multiple locations. The roaming function is used to provide radios in this network with voice and data services across cells (base stations)

Easy Installation

Its well-engineered design makes wall mounting very simple using the optional wall bracket. This makes it flexible with regards to install location, improving convenience and discretion in buildings

Fail-safe Communication

Provide a fail-safe radio signal by connecting the repeater to a 12v battery in addition to the normal supply of power. If the AC supply fails, the RD625 switches automatically to battery backup

Functions

Created with Sketch. Mixed Mode Operation

This feature allows the device to automatically detect and switch between analogue and digital modes based on the signal received.

Created with Sketch. IP Site Connect

Create and control your network using IP (internet protocol) site connect.

Created with Sketch. Digital Encryption

40 bit Enhanced Encryption as Standard on the latest firmware version, ensuring your transmissions are always secure

Created with Sketch. Pseudo Trunking

Using pseudo-trunking, a Hytera patented technology, slots can be shared to improve capacity usage with transmissions either direct to handset or to other repeaters.

Hytera Rd625 01

Created with Sketch. Wall Mounting

Simple, flexible installation utilising the specially designed wall mounting bracket.

Created with Sketch. Priority Scan

Automatically scans and switches transmission to receive and deliver a priority call.

Accessories for RD625

Included as standard with RD625 Included as standard with RD625

Systems that work with RD625

Technical Specifications

General

Frequency Range
VHF: 136-174MHz UHF1: 400-470MHz
Channel Capacity
16
Digital Protocol
ETSI-TS102 361-1,2 & 3
Supply Voltage
AC 90 to 264v DC +13.6v ± 15%
Battery Backup
YES
Integral Battery Charging
YES
Dimensions(W×H×D)
210 x 348 x 108 (mm)
Weight
5.0Kg with duplexer
Display
NO
Programmable Buttons
0
TX Aerial Connector
N-type socket
RX Aerial Connector
N-type socket
Internal Duplexer
YES using optional mounting kit

Environmental Specifications

Dust & Water Intrusion
IP54 Standard

Features

19" Rack Mounting
NO
Back Pack
NO
Multiple CTCSS/ CDCSS
YES
Repeater Knockdown
YES (Analogue & Digital)
IP Ports
1
GPS
NO
Telemetry
YES
Audio Output for Slot A & B
YES
Remote Programming
YES via IP interface
Remote Diagnostic & Control
Software available
Emergency Mode
NO
Lone Worker
NO
Mandown
NO
Priority Scan
YES
Digital Encryption
Advanced encryption (Hytera or DMRA 128 bits and 256bits AES) available via chargeable licence file.
Multiple Key Encryption Decode
YES
Multilanguage Menu
NO
Power on & off user logo programming
NO
Voice Interrupt
Yes (latest firmware required and Smart Dispatch V4.5.6 or above)
Text Messaging
Yes via application software
Quick Text Messages
Up to 25 pre-programmed via CPS (for telemetry use)
MPT1327 / 1343 Trunking
NO
Tier 3 Trunking
NO
Single Site XPT
NO
Multi-Site XPT
NO
Number of Sites
NO
Over-the-Air Programming
NO
Analogue Only Version
Not Available